A gas sensor is a device that measures the proportion of a specific gas in a specific space.
Each sensor has its own characteristics and differences. We have summarized them below.
The usual method for measuring ethylene is gas chromatography, but this is very expensive.
Furthermore, when measuring by gas chromatography, the analysis must be performed in an environment such as a laboratory.
Our products have been development as sensors that can perform continuous measurements in the field.
The product is easy to operation and works well with our sensors and various devices, so we can also suggest combinations.
If you are considering a demo or purchasing, please feel free to contact us!
It is known that when measuring ethylene gas with an electrochemical sensor, sensitivity is not achieved in low temperature environments.
features of our ethylene gas sensor is that it can measure low concentrations of 0 to 100 ppm even in low temperature environments.
Furthermore, it has an excellent resolution of 0.01 ppm, allowing for precise measurements.
Models | MG6000 |
Measurement principle | Zirconia solid electrolyte system |
sampling Method | Suction pump type |
Response time | Within 1 minute (90% response) |
Accuracy ratings | 0.0~25.0%O 2 …±0.5%O 2 ±1digit 0.00~2.50%O 2 …±0.05%O 2 ±1digit (In a dry gas consisting of oxygen and nitrogen) |
Domestic products
The MG6000 is an oxygen concentration meter with a built-in suction pump that can measure the gas by sucking it in through a pipe. When used in combination with an activated carbon filter unit (sold separately), it can measure the oxygen concentration by removing trace amounts of toxic gases and dust with filter.
Models | MG□□□□ |
Measurement principle | Zirconia solid electrolyte system |
Air sampling method | Natural diffusion type |
Response time | Within 20 seconds (90% response) |
Accuracy ratings | 0.0~25.0%O 2 …±0.5%O 2 ±1digit 0.00~2.50%O 2 …±0.05%O 2 ±1digit (In a dry gas consisting of oxygen and nitrogen) |
The MG series is an oxygen meter that uses a limiting current type zirconia oxygen detection element and is equipped with a variety of alarm functions as well as a measurement value display.
This is a wall-mounted CO2 monitor with a digital display of measured values and an analog output signal.
Models | MH2□□□□ |
Measurement range | 0-100 ppm |
display resolution | 0.01ppm (measurement range: 0.00 to 9.99ppm) 0.05ppm (measurement range: 10.00-100.0ppm) |
If you register as a CHINO Web member, you will be able to view the product's instruction manual.
If you wish, we will send you the latest information on CHINO products via email.
You must be a login to download.