Domestic products
The MA series CO2 monitors are wall-mounted CO2 (carbon dioxide) concentration meters that use a solid electrolyte or infrared absorption sensor detection method and are equipped with functions such as a digital display of measured values and an analog output signal. They are available with an alarm specifications that outputs a warning value mechanical relay output or sounds a buzzer, and with a control function that is equipped with a relay output for adjusting the CO2 concentration. There is also an aspirating type that can measure the CO2 concentration by aspirating gas from places where a CO2 monitor cannot be directly installed.
Model | Type | Measurement range | Models |
---|---|---|---|
With alarm function | Wall Mounting Type (Solid electrolyte type) |
100-5,000 ppm | MA100□-00 |
0.01~10.00% | MA100□-10 | ||
Wall Mounting Type (Infrared absorption method) |
0-5000 ppm | MA110□-00 | |
Wall-mounted suction type (Solid electrolyte type) |
100-5,000 ppm | MA100□-0P | |
0.01~10.00% | MA100□-1P | ||
With control function | Wall Mounting Type (Solid electrolyte type) |
100-5,000 ppm | MA500□-00 |
0.01~10.00% | MA500□-10 | ||
Wall Mounting Type (Infrared absorption method) |
0-5000 ppm | MA510□-00 | |
Wall-mounted suction type (Solid electrolyte type) |
100-5,000 ppm | MA500□-0P | |
0.01~10.00% | MA500□-1P |
Measurement principle | Lithium-ion solid electrolyte system | Infrared absorption method |
---|---|---|
Measurement range | 100~5000ppm, 0.01~10.00% | 0-5000 ppm |
Measurement value display | 4-digit digital display with red LED | |
Resolution | 5000ppm range 10ppm (less than 3000ppm)/25ppm (more than 3000ppm) 10% range 0.01–0.99% (0.01%) 1.0–10.0% (0.1%) |
10ppm (less than 3000ppm)/25ppm (more than 3000ppm) |
Accuracy ratings | 5000ppm range ±7% of measured value ±10ppm (less than 3000ppm) ±7% of measured value ±25ppm (3000ppm or more) 10% range ±10% ±0.01% (0.01 to 0.99%) of measured value ±10% ±0.1% of measured value (1.0 to 10.0%) |
(±50 ppm or 5% of measured value) ±10 ppm (±50 ppm or 5% of measured value) ±25 ppm |
Response time | Within 120 seconds (90% response) | Within 180 seconds (90% response) |
Alarm Output | higher limit and lower limit individual LED lamps lights higher limit / lower limit mechanical relay output (only with alarm function) |
|
control Output | control LED lamp for signal output lights 1 circuit a contact mechanical relay output (with control function only) |
|
transmission signal output | 4 to 20mADC or 1 to 5VDC (For 0-5000ppm, 0.0-10.0%) |
|
Warm-up time | Approximately 30 minutes | 約60秒 |
Calibration | One-point calibration of inspection gas using a special inspection kit | |
Power supply | 100VAC±10%, 50/60Hz | 24V DC |
Power consumption | 約8VA | Maximum 4W |
Operating temperature limit | 0~45℃ | 0~50℃ |
Operating humidity range | 95% RH or less (but no dew condensation) | |
External dimensions | Wall mounting type W120×H120×D55mm Wall-mounted suction type W223×H321×D140mm |
|
Weight | Wall-mounted type Approx. 430g Wall-mounted suction type Approx. 2.3 kg |
約430g |
Office air conditioning, dry ice detection, CO2 refrigerant leak detection boiler, plant factory, mushroom cultivation
If you register as a CHINO Web member, you will be able to view the product's instruction manual.
If you wish, we will send you the latest information on CHINO products via email.
You must be a login to download.