Controllers and how to choose them
A controller is an instrument that determines the output value in order to bring the measured value closer to the target value, and outputs an output that matches operation end.
A controller specifically designed for temperature control is called a temperature controller.
In addition to control temperature, they can also be used to display measured values and target values, and to issue alarm (contact) outputs.
How to Choose
When selecting a controller, the following factors must be considered:
Choose by purpose
First consider whether you want to control to a single fixed value, or whether you want control program it to control under certain conditions.
Even in the case of fixed control, it is possible to provide functionality similar to pseudo program operation by using remote SV function.
In addition to control output, the results can also be used as an alarm output or transmission signal, making it possible to use the system as a whole.
Choose your size
Select from the German Industrial Standard (DIN) sizes as the basic size.
Choose from W48 x H48mm, W48 x H96mm, H96 x H96mm.
Selecting control output
There are various types of control output. Select the one that suits control target.
The main types are as follows:
・On-off pulse type
・On-off servo type
・Current output type
・ SSR drive pulse type
・Voltage output type
Some models have two-output regulators.
Choose option
In addition to control output signals, various option are available as needed.
・Alarm output (contact)
・Transmission signal output
・Communication interface
There are many other option available in addition to those listed above.
If you have any problems with selection or selection, please contact our sales office or contact us.
Select a product by specifications
Digital indicating controller
| DB1000 |
DB2000 |
DB630 |
DB650 |
DB670 |
|
|
|
|
|
■ Accuracy ratings
+/- 0.1% of measurement range +/- 1digit |
■ Adjustment Output
4 to 20mA
On-off pulse conduction signal
On-off pulse voltage signal
on-off servo conduction signal
0~10V |
■ Alarm function
4 points (relay output) |
■ Alarm function
2 points (relay output, option) |
■ サイズ
W96 x H96 x D120mm
|
■ サイズ
W48 x H48 x D80mm |
■ サイズ
W48 x H96 x D65mm |
■ サイズ
W96 x H96 x D65mm |
| LT23A |
LT35A |
LT37A |
LT45A |
LT47A |
|
|
|
|
|
■ Accuracy ratings
+/- 0.5% of measurement range +/- 1digit |
■ Accuracy ratings
+/- 0.2% of measurement range +/- 1digit |
■ Accuracy ratings
+/- 0.1% of measurement range +/- 1digit |
■ Adjustment Output
4 to 20mA, 0 to 20mA
On-off pulse conduction signal
On-off pulse voltage signal |
■ Adjustment Output
4 to 20mA, 0 to 20mA
On-off pulse conduction signal
On-off pulse voltage signal
on-off servo conduction signal
1~5V, 0~5V, 0~10V |
■ Alarm function
3 points (relay output, COM common) |
■ Size
W48 x H48 x D60mm (terminal block type) |
■ サイズ
W48 x H96 x D65mm |
■ サイズ
W96 x H96 x D65mm |
■ サイズ
W48 x H96 x D65mm |
■ サイズ
W96 x H96 x D65mm |
For other controllers, click here
Program Controller
| KP1000 |
KP2000 |
DP1000G ( Japan Only) |
DP2000G ( Japan Only) |
|
|
|
|
|
■ Accuracy ratings
+/- 0.1% of measurement range +/- 1digit |
■ Adjustment Output
4 to 20mA
On-off pulse conduction signal
On-off pulse voltage signal
on-off servo conduction signal
0~10V |
■ Adjustment Output
4-20mA, 1-5mA
On-off pulse conduction signal
On-off pulse voltage signal
on-off servo conduction signal
0~10V |
■ Alarm function
4 points (relay output) |
■ サイズ
W96 x H96 x D120mm
|
■ サイズ
W144 x H144 x D233mm
|
