insulation tube

For thermocouples

For thermocouples, organic insulation materials such as Teflon tubes (maximum 250°C) are available, but since they are generally used at high temperatures, heat-resistant porcelain is used.
The following items may be considered as conditions for the insulation pipe.

• Must have sufficient insulation properties at the operating temperature and in the atmosphere.
• Must be strong enough to withstand thermal and mechanical shock.
• Does not contain any harmful substances that may react with or attack the metal of the thermocouple.
• Do not bend or fuse during use.

shape	Material *	Wire	Outer diameter x hole diameter x length (mm)
Round 1 Hole	AL	φ0.32以下	1×0.4×100
	AL	φ0.65以下	1.2×0.8×100
	AL	φ0.65以下	2×1×100
	AL	φ1.0	2.5×1.5×100
	AL	φ1.6	3×2×100
	AL	φ2.3	5×3×100
	AL	φ3.2	6×4×100
	SL	φ0.5	1.2×0.8×100
	SL	φ0.5	2×1×100
Round 2 holes	AL	φ0.65以下	3×0.8×100
	AL	φ0.65以下	4×1×100
	S	φ1.0以下	6×1.5×100
	S	φ1.6以下	8×2×100
	SL	φ0.5以下	3×0.8×100
	SL	φ0.5以下	4×1×100
Oval 2 holes	S	φ2.3	10×7.5×3×34
	S	φ3.2	12×7.5×4×34
Rounded tip, 2 holes	S	φ2.3	12×3×35
	S	φ3.2	14×4×35
Rounded tip, 2 holes	AL SL	φ0.5	4×1×6
	AL SL	φ1.0	6×1.5×6
Rounded tip, 2 holes	S	φ2.3	12×3×35
	S	φ3.2	14×4×35
	AL SL	φ0.5	4×1×6
	AL SL	φ1.0	6×1.5×6
Round 4 holes (In the case of two pairs)	S	φ0.65以下	6×1×100
	S	φ1.6	8×2×100
	S	φ3.2	14×4×30

For resistance thermometer

Similarly, resistance uses a three-hole insulation tube to provide electrical insulation for the three Ni wires.
The outer diameter x hole diameter x length is φ4 x 1.0 x 100, and the material is S ^*.

*Material

*Please refer to the catalog for other specifications.