control Room - DB Series/KP Series - Chino Controllers: The First Step

This explains how to operation the DB series/KP series.
*We will explain using DB1000 as an example.

①The setting value will not be updated unless you press the Enter key.

The rightmost button is the Enter key. When you change a setting value with cursor, a "?" display. The setting will not be updated unless you press the Enter key.
	When you press Enter, the "?" will disappear and the setting value will be updated.
*If you accidentally change the numbers of an unfamiliar setting item...
	If you wait 3 minutes without pressing Enter, the original values will remain and you will be returned to the initial screen.

②Press the Mode key twice to return to the first screen.

	It's very useful to know how to return to the starting screen, like the home button on a smartphone.
Press the leftmost Mode key twice to return to the first screen.

③The settings are organized by mode number according to the type of item.

Once you remember operation ① and ② above, the rest is easy. Chino controllers are organized by mode numbers according to the type of setting item.
This is the first screen. Press the Mode key to go to the Mode selection screen.	Use cursor to select the Mode number.	Mode4 is OUTPUT SET This is where all the "output" related settings are gathered.
Mode 5 is the INPUT SET. Press the SEL key to view the contents of Mode 5.	First, let's look at the measurement range.	Next is "unit".
In this way, the setting items are display in order.	Use cursor keys to change the value. Press Enter to confirm the value.	Press Mode twice to return to the first screen.

If you are using DB600, please pay attention to the following points.

• Enter key: It works the same way. When you change a value with cursor, the period on the right side flash instead of "?".
• Mode key Instead of simply pressing it like the DB1000, you need to press and hold the MODE key on the far left.