mounting bracket

We provide tools for mounting thermocouples and resistance thermometer.

Flanges

Fixed flange	Sliding Flange

unit: mm

JIS Standards	Size nominal		Models		φD	Flange dimensions				Bolt holes
JIS Standards	A	B	SUS304	SUS316	φD	t	f	φg	H	φC	φh	number
5kg/cm ² Flange Basic dimensions	10	3/8	FC3	FM3	75	9	1	39	34	55	12	4
	15	1/2	FC4	FM4	80	9	1	44	34	60	12	4
	20	3/4	FC6	FM6	85	10	1	49	35	65	12	4
	25	1	FC8	FM8	95	10	1	59	35	75	12	4
	40	1 1/2	FCD	FMD	120	12	2	75	37	95	15	4
	50	2	FCE	FME	130	14	2	85	39	105	15	4
	65	2 1/2	FCF	FMF	155	14	2	110	39	130	15	4
	80	3	FCG	FMG	180	14	2	121	39	145	19	4
	100	4	FCH	FMH	200	16	2	141	41	165	19	8
10kg/cm ² Flange Basic dimensions	10	3/8	JC3	JM3	90	12	1	46	37	65	15	4
	15	1/2	JC4	JM4	95	12	1	51	37	70	15	4
	20	3/4	JC6	JM6	100	14	1	56	39	75	15	4
	25	1	JC8	JM8	125	14	1	67	39	90	19	4
	40	1 1/2	J.D.	JMD	140	16	2	81	41	105	19	4
	50	2	JCE	J.M.E.	155	16	2	96	41	120	19	4
	65	2 1/2	JCF	JMF	175	18	2	116	43	140	19	4
	80	3	JCG	JMG	185	18	2	126	43	150	19	8
	100	4	JCH	JMH	210	18	2	151	43	175	19	8
20kg/cm ² Flange Basic dimensions	25	1	KC8	KM8	125	16	1	67	41	90	19	4
	40	1 1/2	K.C.D.	KMD	140	18	2	81	43	105	19	4
	50	2	KCE	KME	155	18	2	96	43	120	19	8
	65	2 1/2	KCF	KMF	175	20	2	116	45	140	23	8
	80	3	KCG	KMG	200	22	2	132	47	160	23	8
	100	4	KCH	KMH	225	24	2	160	49	185	23	8

Chino Standards

nominal diameter	Applicable protective pipe diameter φd	Models			Flange diameter φD	Flange dimensions		Bolt holes			Mounting bolt
		Sliding Flange	Fixed flange			t	h	Center circle diameter φC	number n	Diameter φE
		Aluminum	SUS304	SUS316		t	h	Center circle diameter φC	number n	Diameter φE
A	From 17 to 32	SAA	FCA	FMA	100	10	34	70	4	10	M8
B	From 8 to 16	SAB	FCB	FMB	70	7.5	28	50	4	8	M6
C	6.4以下	SAC	FCC	FMC	50	3	13	35	4	4.5	M4

nominal diameter (B)	Applicable protective pipe diameter φd	Models	Screw Dimensions	screw Number of ridges (25.4 mm) Attached	Opposite side and diagonal	A	B	K
Parallel thread	Tapered Thread	Outside diameter C	Valley Path
SUS304	SUS316	SUS304	SUS316	G	F
G, R1/8	6以下	SC1	SM1	TC1	TM1	9.7	8.56	28	14	16.2	6	10	4.0
G, R1/4	8以下	SC2	SM2	TC2	TM2	13.1	11.4	19	17	19.6	8	12	6.0
G, R3/8	10以下	SC3	SM3	TC3	TM3	16.6	14.9	19	21	24.2	10	15	6.4
G, R1/2	12以下	SC4	SM4	TC4	TM4	20.9	18.6	14	26	30	12	20	8.2
G, R3/4	16以下	SC6	SM6	TC6	TM6	26.4	24.1	14	32	37	16	25	9.5
G, R1	22以下	SC8	SM8	TC8	TM8	33.2	30.2	11	41	47.3	20	30	10.4

Type 1	Type 2

unit: mm

	Models
Copper Core	CF1	CF2	CF3	CF4	CF6	CF8
Teflon Core	CR1	CR2	CR3	CR4	CR6	CR8
Screw Size	R1/8	R1/4	R3/8	R1/2	R3/4	R1
For φ1.0	A=35 B=10 G1=14 G2=14	A=31 B=12 G1=17 G2=14	A=36 B=15 G1=21 G2=14	A=43 B=20 G1=26 G2=14	A=50 B=18 G1=32 G2=14 G3=17	A=52 B=20 G1=38 G2=14 G3=17
For φ1.6
For φ2.0
For φ3.2
For φ4.8
For φ6.0
For φ6.4		A=39 G2=17	G2=17	A=43 G2=17	A=58 G2=17	A=60 G2=17
For φ8.0		A=39 G2=17	G2=17	A=43 G2=17	A=58 G2=17	A=60 G2=17
For φ10			A=41 G2=21	A=44 G2=21	A=53 B=25 G2=21	A=62 B=25 G1=41 G2=21
For φ12				A=53 G2=26	A=55 G2=26	A=63 G2=26
For φ15		Not available for production		A=53 G2=26	A=55 G2=26	A=63 G2=26
For φ16					A=60 G2=32	A=65 G2=32
For φ22						G2=41

is type 2

*Please refer to the catalog for other specifications.

Support

Straight thread (G)	Tapered thread (R)

(Screw-type sliding nipples have the same dimensions)