Frequently Asked Questions (FAQ)
When starting operation with the MG2100 series, after "heat up (HUP display)" → "refresh operation (rEF display)", it returns to "heat up (HUP display)" and measurement does not start.
| Is the power supply 5V or less? If it is supplying 5V, it may be a power supply with a protection circuit, so use a power supply without a protection circuit. Also, when using an MG3010 power supply, use 2mm2 lead wires and connections with a length of 30m or less (wiring resistance, 0.3Ω or less on one side). |
