FC EXPO Spring 2023 Online Exhibition
FC EXPO [Spring] 2023 ~19th [International] Hydrogen and Fuel Cell Exhibition~
Wednesday, March 15, 2023 - Friday, March 17, 2023
Our equipment, sensors, evaluation devices, etc. support the realization of a carbon-free society and energy conservation.
- Water electrolysis evaluation equipment
- Reversible PEM evaluation device
- SOFC/SOEC evaluation holder
- Hydrogen Sensor
- Temperature Sensors (Japan Only)
- Power Monitoring
Water electrolysis evaluation equipment
- Electrode cell: alkaline water electrolysis/solid polymer water electrolysis
- Circulating water temperature range: 30℃ to 80℃
- Circulating water flow rate: 20~100ml/min
- Gas-liquid separation tank capacity: 1.5 liters / The lid can be removed for internal cleaning
- Hydrogen flow meter: 200ml/min
- Oxygen flow meter: 100ml/min
- Anode side hydrogen concentration meter: 0 to 4 vol%
Reversible PEM evaluation test device
- Initial testing and durability testing can be easily performed
- Water electrolysis and power generation evaluation possible with one device
- View measurement data on the go and notification alerts by email
SOFC/SOEC evaluation holder
- Supports cell sizes of 50 and 100 mm
- Made of ceramic, so it is not easily affected by metal poisoning
- Designed to relieve thermal stress caused by high temperature spring structure
- Supports evaluation tests under various conditions, such as water vapor electrolysis tests and evaluations under high fuel utilization rates
Explosion-explosion proof in-line hydrogen sensor reference exhibit
- Hydrogen concentration can be measured from 1 to 100%
- stability platinum resistance enable high accuracy measurements
- The sensor utilizes the thermal conductivity of gas, so it has excellent long-term stability.
- The detector is separate from the main body, making it easy to install.
Temperature Sensors (Japan Only)
Intrinsically explosion proof platinum-cobalt sheathed resistance thermometer NR800
Platinum/Cobalt 4-wire
4K to 375K (NR800-6)
15K to 375K (NR800-7)
- Accurate measurement from 4K to room temperature
- Explosion class and ignition level of target gas or vapor: ⅡCT4Ga
- Obtained NK certification (for ships)
Explosion explosion proof temperature sensor
Explosion explosion proof temperature sensor for use in hazardous environments where flammable gases or liquids are present. Thermocouples and resistance thermometer are available.
- explosion proof structure: ExdⅡCT5
- mounting bracket available are flange type, nipple type, and compression fitting
Power Monitoring
This system measures the voltage and current of factory equipment and distribution boards, wirelessly transmits the data to a receiver, and collects and monitors it on a computer. Up to 360 transmitters (6 receivers) can be managed by one computer.
Realizes detailed data acquisition for demand monitoring and various equipment monitoring.
