Global version integrated package software TRAMS
* Software downloads are
a members-only service.
*If you wish to download, please
login as a member and click "Download."
The download button is at the bottom of the page.
Comprehensive software for setting, recording and analyzing
"TRAMS" is an integrated package software that sets parameter for our recorders, controllers, and indicators, and also collects and analyzing data.
This page contains the Global version, which is available in English and Korean.
parameter Settings
- Easily set various parameters
- Editable online
- parameter files can be reflected later.
Data acquisition and monitoring
- Can handle up to 300 pieces of data
- Recorders, controllers, and indicators can be connected together
4. Data analyzing
- Outputting reports using Excel sheets
- Signature for recorded data file (KR with heat treatment support function)
procedure
- Copy the data file to your PC (e.g. FTP)
- Open the file in TRAMS and click the Signature button on the file properties screen.
- Select the heat treatment support specifications KR to connect to
- Enter your user ID and password
Device connection example
- Supports Ethernet, serial and USB communication
- Supports flexible system construction
- *1 Only one serial port can be registration.
- *2 The maximum number of compatible devices that can be registration is 32, including all Ethernet and serial ports. (However, the maximum number of devices that can be connected to interface converter or SB700 via RS-485 is 31.)
- *3 If your computer does not have a serial port (RS-232C), a USB-RS232C converter is required.
- *4 Ethernet ports and serial ports can be used together.
- *5: It is possible to mix controllers, indicators, and other models on one communication line, but communication modes (RTU mode, ASCII mode) cannot be mixed.
application software overview
| item |
TRAMS IV |
TRAMS III |
| Applicable devices |
Digital Indicating Controllers / Indicators / Alarm Meters
Digital indicating controller DB600 series
Digital indicating controller DB1000 series
Digital indicating controller DB2000 series
Digital Programmable Controllers KP1000 Series
Digital Program Controllers KP2000 Series
Digital Program Controllers KP3000 Series
Digital indicating controller LT23A, LT35A/LT37A, LT45A/LT47A (Setting is not supported.)
Digital indicating alarm meter DI5000 series
Graphic program controller DP-G series
■Recorder/ recorder
Web recorder SC5000 (Settings not supported.)
High performance graphics recorder KR-2H/KR-3H series
Graphic with heat treatment support recorder KR
Graphics recorder (PDF chart) KR2D/KR3D Series
Graphics recorder KR2S00/KR3S00 Series
Graphics recorder KR2000/KR3000 Series
hybrid Memory recorder AH4000/AL4000 Series
hybrid Recorder KH4000/KL4000 series
hybrid Recorder LE5100, LE5200 (Settings are not supported.)
■Others
high accuracy Temperature transducers KT-M series
*Some devices may not be supported depending on the software version. |
| File size |
Approximately 9MB |
Approximately 6MB |
| Operating environment |
Supported OS
Windows 11 (64bit)
Windows 10 (32bit/64bit)
*.NET Framework 4.7.2 or later must be able to be installed on the above OS. |
| Memory capacity |
1GB or more (32bit), 2GB or more (64bit) |
| Disk space |
At least 2GB of free hard disk space |
| Monitor |
Screen resolution 1024 x 768 or higher |
| install |
Microsoft .NET Framework 4.7.2
Microsoft Excel 2016/2019/2021
*If not installed, the daily report output, monthly report output, and data list output functions will be limited. |
| Copyright holder |
CHINO CORPORATION |
| Reprint conditions |
Reproduction prohibited |
| File models |
Windows installer models (exe) |
| Revision history |
Please see the changelog page. |
How to install
Please refer to the instruction manual when installing.
Download TRAMS.zip, unzip it, then double-click setup.exe to install.
*If an older version of TRAMS is installed, please uninstall it first.
Then install the new version of TRAMS.
