temperature/humidity Transmitter R220

Equipped with a ventilation device, it is possible to measure even when there is no wind.

The following four types are available, taking into consideration the usage environment and conditions.

• R220-□0 (standard type)
  This is the basic type of the R220 series and is the most widely used models.
  The tank capacity is approximately 300ml, but please refill the tank water approximately every 5 days.
• R220-□0W (2-pair element type)
  In order to regulate the temperature and humidity in a temperature and humidity chamber, etc., two pairs resistance thermometer are provided for both the dry bulb and the wet bulb, and to record the data at the same time.
  structure consists of two pairs of temperature resistance elements inside the dry-bulb and wet-bulb protective tubes.
• R221-□0 (automatic water supply type)
  It is suitable for use in places where water consumption is rapid, such as high temperature and low humidity.
  A continuous supply of water can be provided by connecting the pipes to a water supply or tank.
  The water level detection float switch opens and closes the solenoid valve to keep the water level at the proper level at all times.
• R221-□0W (automatic water supply, 2-pair element type)
  This automatic water supply type has two pairs of dry-bulb and wet-bulb resistance thermometer to allow for adjustment and recording.