Small calibration unit for low temperature KT-H504

The KT-H504 is a small and highly practical calibration device designed for temperature calibration of resistance thermometer and thermocouples.

Calibration possible from -30 to 155°C
KT-H504 using Peltier element: -30℃ to 155℃
The use of a heat equalizing block significantly reduces lifting and lowering times.

Calibration possible from -30 to 155°C
A type using a Peltier element with a calibration temperature range of -30 to 155°C is available.
Shorten heating and cooling times
KT-H504 (-30 to 155°C type): -30°C to -155°C for approx. 20 minutes
Excellent stability and temperature uniformity
KT-H504 (-30 to 155°C type): ±0.02°C/30 min
Within 0.1℃ (bottom ~ 40mm)
Simple temperature setting
The quick switch button allows you to switch between eight pre-set temperatures.
Calibration report issued (option)
This device can be equipped with option Chino calibration certificate for the calibration device.
Issuance of JCSS calibration certificate (option)
We can issue JCSS calibration certificates based on the Measurement Act traceability system.

Specifications

Models	Calibration Temperature Range
KT-H504	-30～155℃

Models	KT-H504
Calibration Temperature Range	-30 to 155°C (Ambient temperature 23°C)
Temperature stability	±0.02℃
Temperature control Method	heating/cooling interference control, Z control
Heat equalizing block	Detachable
Temperature sensor to be calibrated	195mm or more
Temperature display resolution	0.1℃/0.01℃
communication interface	RS-232C
Power supply voltage	100-120/200-240V AC 50/60Hz designate
Maximum power consumption	350VA (at 100V AC) 450VA (at 240V AC)
mass	約7.0kg