Explosion explosion proof resistance thermometer RU, NRD (Japan Stadnards)

Flameproof explosion proof resistance thermometer RU and NRD are temperature sensors used in locations where there is a risk of ignition and explosion due to the presence of flammable gas or vapor of flammable liquid.The structure consists of a explosion proof terminal box that can withstand an internal pressure of 1MPa gauge pressure, terminal board made of diaryl phthalate resin with good insulation, a protective tube, mounting bracket, wires or elements, and an insulation tube.Depending on the type of mounting bracket, there are straight, flange, and nipple types.

Can be used in dangerous environments such as with flammable gases and flammable liquids

The sensor can be used in hazardous locations with explosion and ignition ratings of d2G4.
All threaded parts of the lid and body of the terminal box that can be opened from the outside, threaded parts of the protection tube and terminal box body, and threaded parts for attaching metal conduit pipes are based on factory electrical equipment explosion proof pointer (gas, steam explosion proof).
terminal board is made of diaryl phthalate resin for insulation, with the minimum creepage distance between terminal and between terminal box and terminal being 8 mm, and the minimum insulation clearance being 8 mm.
The boundary between terminal box and protective tube is a pressure-resistant stud-type pull-in method for the standard type, and a pressure-resistant resin-fixed pull-in method for the sheath type.

Specifications

explosion proof specifications

explosion proof structure	Explosion explosion proof structure
Explosion and ignition ratings	d2G4
Hazardous area of use	1st and 2nd class
Lead Wiring Method	Metal conduit is screwed into terminal box
Conduit Screw	G1/2
ground Method	Using metal conduit as a substitute for ground wire
Construction method	Plant electrical equipment based on explosion proof pointer (gas steam explosion proof)

resistance thermometer specifications

resistance element	Pt100 ^*, 100Ω at 0℃ 3-wire type
tolerance	JIS Class A, Class B
Specified current	2mA, 1mA
Measurement temperature	Class A, B - -200 to 650°C (JPt100 is 500°C)
Protective tube outer diameter	φ3.0～φ16mm
Protective Tube Material	SUS304, SUS316, SUS310S, SUS347

*JPt100 is also available. The specified current is Class B: 5mA, Class A: 2mA.

Download Documents & Softwares

Catalog

Specification Sheet (PS Sheet)

Explosion explosion proof temperature sensor

ファイルサイズ1MB

Document No.

PE-04-8

Downloads

CAD Data

*Downloading materials is a members-only service.
*If you wish to download, please login as a member and click "Download."

Instruction Manual